Hello,
First of all, sorry I dont speak german, I ll try with my poor english...
I have just received my robonect and played with it for 2 days but here is my problem. After a few minutes (sometimes 2, sometimes 2 hours) the robonect web console is no more accessible via my home box, neither the robonect access point (automower wifi). the only wifi online is the "robonect (zero conf)" which I cannot connect. If I set the power button to OFF, the robonect zero conf wifi stays online (tried during 30 minutes). My only way to reboot the robonect is to disconnect the battery... Then everything is okay, until ...some minutes and then...no more access and only the robonect zero conf wifi is online.
Anybody with this kind of problem ? I know my automower is not up to date (MSW 4), but I dont know if it matters.
Thank you for any help.
Nicolas
V0.9c can't connect to web console
-
- erfahrener Forum-Nutzer
- Beiträge: 68
- Registriert: Do 16. Feb 2017, 13:58
- Mäher: Husqvarna Automower 105
- Firmware des Mähers (MSW): MSW 6.xx.xx
- Herstellungsjahr: 2016
- Robonect-Modul: Robonect Hx (Rev.3)
- Robonect Firmware: Last
Re: V0.9c can't connect to web console
more than 1 access point with the same ssid and password on your ground = known Problem.
if not....its maybe a EOA Part. Fabian will (in this Case send you a new one)
Eike
if not....its maybe a EOA Part. Fabian will (in this Case send you a new one)
Eike
-
- Administrator
- Beiträge: 2907
- Registriert: Di 19. Jan 2016, 18:34
- Wohnort: Kiel
- Mäher: Gardena SILENO City 500
- Firmware des Mähers (MSW): MSW 11.xx.xx
- Herstellungsjahr: 2017 (Modell 2018)
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: stets die Allerneuste :-)
- hat sich bedankt: 1 Mal
- wurde gedankt: 60 Male
- Kontaktdaten:
Re: V0.9c can't connect to web console
As eike said: there is a known problem with networks, which consists of two or more access points with the same ssid. Does the module runs stable, when you didn't connect it to your home network?
Do you Häberle possibility to connect it was a unique router / ssid?
(A solution is already in approvement)
Do you Häberle possibility to connect it was a unique router / ssid?
(A solution is already in approvement)
Werbefläche zu vermieten.
-
- Forum-Anfänger
- Beiträge: 2
- Registriert: Di 21. Mär 2017, 18:00
- Wohnort: France bOURGOGNE
- Mäher: Husqvarna Automower 308
- Firmware des Mähers (MSW): MSW 4.xx.xx
- Herstellungsjahr: 2014
- Robonect-Modul: Robonect Hx (Rev.3)
- Robonect Firmware: 1.0beta5
Re: V0.9c can't connect to web console
Thank you, this is exactly my problem. It worked perfectly since yesterday with only the automower access point. My home ( and garden...) network has multiple wifi access points with same ssid and password. Sounds like the known problem.
Automower 308, Soft 308X, MSW 4.02.00, SUB 4.00.00, MMI 4.02.00
-
- Administrator
- Beiträge: 2907
- Registriert: Di 19. Jan 2016, 18:34
- Wohnort: Kiel
- Mäher: Gardena SILENO City 500
- Firmware des Mähers (MSW): MSW 11.xx.xx
- Herstellungsjahr: 2017 (Modell 2018)
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: stets die Allerneuste :-)
- hat sich bedankt: 1 Mal
- wurde gedankt: 60 Male
- Kontaktdaten:
Re: V0.9c can't connect to web console
This is my prio 1 task regarding robonect after my holidays.
Werbefläche zu vermieten.